CRITICAL ANALYSIS OF PAYMENT DELAYS, UNDER-PAYMENTS AND NON-PAYMENTS ENCUMBERING ENGINEERING CONSULTANCY PRACTICES IN CONSTRUCTION PROJECTS

Authors

  • Ting Sim Nee Department of Civil Engineering, Faculty of Engineering, UNIVERSITI MALAYSIA SARAWAK
  • Lee Yee Yong Department of Civil Engineering, Faculty of Engineering, UNIVERSITI MALAYSIA SARAWAK
  • Gui Hun Chuen Department of Quantity Surveying, Faculty of Built Environment, UNIVERSITI MALAYSIA SARAWAK
  • Chong Wan Siang Department of Quantity Surveying, Faculty of Built Environment, UNIVERSITI MALAYSIA SARAWAK
  • Ng Chee Khoon Department of Civil Engineering, Faculty of Engineering, UNIVERSITI MALAYSIA SARAWAK

DOI:

https://doi.org/10.21837/pm.v24i40.1977

Keywords:

Payment, Delays, Non-Payment, Engineering, Consultants

Abstract

Engineering Consultancy Practice (ECP) plays a crucial role in Malaysia's construction industry, supporting the nation development and progress. Engineering consultants through their professional practices provide essential technical services and expert advice to clients throughout construction projects. In Malaysia, consultants are typically reimbursed based on the Board of Engineers Malaysia (BEM) Scale of Fees, which serves as the primary revenue source sustaining ECP operations. However, despite the adherence to BEM's Scale of Fees, engineering consultants in Malaysia continuously encounter payment issues, namely payment delays, under-payment and even non-payment, posing a concerning scenario within the nation's construction industry. To determine the extent and significance of payment issues affecting engineering consultants, this study employed a structured questionnaires survey targeting engineering consultants in Malaysia. A total of 174 responses were collected through online questionnaires, telephone interviews, face-to-face engagement and email correspondence. The findings show that late payment, underpayment and non-payment are prevalent across government, GLC and private projects, with the private sector recording the greatest incidence, delays averaging one to three months, and typical payment deficits of 10–30%. The study contributes empirical benchmarks that support more effective contractual, regulatory and payment management frameworks to strengthen financial sustainability within engineering consultancy practice.

Downloads

Download data is not yet available.

References

Abdellatif, M., & Othman, A. (2006). Improving the sustainability of low-income housing projects: The case of residential buildings in Musaffah Commercial City in Abu Dhabi. Emirates Journal for Engineering Research, 11, 47–58.

Azman, M. N. A., Dzulkalnine, N., Hamid, Z., & Beng, K. (2014). Payment issue in Malaysian construction industry: Contractors’ perspective. Jurnal Teknologi, 70. https://doi.org/10.11113/jt70.2804

BEM Form A (Revised 1/83). Memorandum of agreement between client and consulting engineer for professional services.

Chitongo, A. M., & Pretorius, L. (2017). Engineering consultant project cash flow controls: An empirically-supported system dynamic conceptual model. In Proceedings of PICMET '17: Technology management for interconnected world (pp. 1–10). Oregon, USA.

du Preez, M. (2018). The consulting industry as an information behaviour context: Consulting engineering as an example. In Proceedings of ISIC: The information behaviour conference, 2018: Part 2 (pp. 1–20). Krakow, Poland.

Hasmori, M., Ismail, I., & Said, I. (2012). Issues of late and non-payment among contractors in Malaysia. In Proceedings of 3rd International Conference on Business and Economic Research (3rd ICBER 2012). Golden Flower Hotel, Bandung, Indonesia.

Hoffmann, J., Steiner, A., & Jarren, O. (2001). The inimitable outsider: Contracting out public affairs from a consultant’s perspective. Journal of Communication Management, 15(1), 23–40.

Jaafar, M., Abdul Aziz, A. R., & Lian, A. S. W. (2008). Marketing practices of professional engineering consulting firms: Implement or not to implement?. Journal of Civil Engineering and Management, 14(3), 199–206.

Judi, S., & Rashid, R. (2010). Contractor’s right of action for late or non-payment by the employer. Journal of Surveying, Construction & Property, 1, 1–31. https://doi.org/10.22452/jscp.vol1no1.4

Lai, J., Mohamad Zin, R., & Yahya, K. (2014). A conceptual review of engineering consultancy practice (ECP) business model. Archives of Business Research, 2, 161–173. https://doi.org/10.14738/abr.24.398

Lai, J., Zin, R., Yahya, K., & Saar, C. C. (2016). Engineering consultancy practice (ECP) business model in Malaysia: A structural equation modeling (SEM) approach. International Journal of Business and Management, 11(3).

Lee, Y. Y., Law, A. K. H., Ting, S. N., Gui, H. C., & Ahmad Zaini, A. (2022). BIM implementation in Sarawak construction industry: Awareness, readiness and challenges. E2S Web of Conferences, 347, 01010.

Maritz, M. J., & Robertson, D. C. (2012). What are the legal remedies available to contractor and consultants to enforce payment?. Journal of the South African Institution of Civil Engineering, 54(2).

Mohd Badroldin, M. K. A., Abdul Hamid, A. R., Abdul Raman, S., Zakaria, R., & Mohandes, S. R. (2016). Late payment practices in the Malaysia construction industry. Malaysia Journal of Civil Engineering, 28(3), 149–162.

Rahman, H. A., & Ye, K. M. (2010). Risk of late payment in the Malaysian construction industry. World Academy of Science, Engineering & Technology, 41, 538–546.

Salehin, S. (2007). Reviewing the current practice of professional fees for civil and structural engineering consultancy services [Doctoral dissertation, Universiti Teknologi Malaysia].

Syed Jamaludin, S. Z. H., Ismail, N. A. A., Ibrahim, I. H., & Japlun, N. (2022). The emerging challenges of adopting BIM in the construction industry: Evidence from Sabah, Malaysia. Journal of Smart Science and Technology, 2(1), 1–14.

Wan Zulkifli, W. Y., Singh, B., Abdul Rahim, A. H., & Ngang, S. M. (2008). The role of consulting engineers in project development. In Issues in construction industry (Book Chapter 8). UTM Publisher.

Ying, D. L., & Wang, L. B. (2020). Research on the whole process engineering consulting service of risk sharing based on CIM reward model. IOP Conference Series: Materials Science and Engineering, 750, 012047.

Downloads

Published

2026-02-12

How to Cite

Nee, T. S., Yong, L. Y., Chuen, G. H., Siang, C. W., & Khoon, N. C. (2026). CRITICAL ANALYSIS OF PAYMENT DELAYS, UNDER-PAYMENTS AND NON-PAYMENTS ENCUMBERING ENGINEERING CONSULTANCY PRACTICES IN CONSTRUCTION PROJECTS. PLANNING MALAYSIA, 24(40). https://doi.org/10.21837/pm.v24i40.1977

Issue

Vol. 24 (2026): PLANNING MALAYSIA JOURNAL : Volume 24, Issue 1, 2026

Section

Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unported License.

Copyright & Creative Commons Licence

eISSN: 0128-0945 © Year. The Authors. Published for Malaysian Institute of Planners. This is an open-access article under the CC BY-NC-ND license.

The authors hold the copyright without restrictions and also retain publishing rights without restrictions.