ACOUSTIC AND MECHANICAL PERFORMANCE OF STYROFOAM-BASED LIGHTWEIGHT CONCRETE

Authors

  • Ngudi Hari Crista Doctoral Program of Environmental Science, UNIVERSITAS DIPONEGORO, INDONESIA
  • Sudharto P. Hadi Doctoral Program of Environmental Science, UNIVERSITAS DIPONEGORO, INDONESIA
  • Erni Setyowati Doctoral Program of Environmental Science, UNIVERSITAS DIPONEGORO, INDONESIA
  • Dhamang Budi Cahyono Department of Civil Engineering, Faculty of Engineering, UNIVERSITAS SEMARANG, INDONESIA
  • Muhammad Hanif Department of Civil Engineering, Faculty of Engineering, UNIVERSITAS SEMARANG, INDONESIA

DOI:

https://doi.org/10.21837/pm.v23i38.1798

Keywords:

Lightweight Concrete, Styrofoam, Noise Reduction, Compressive Strength

Abstract

Noise pollution and the growing issue of Styrofoam waste are major environmental concerns in urban areas. This study investigates the potential of utilizing Styrofoam as a partial aggregate in lightweight concrete to address both challenges. Styrofoam, a non-biodegradable material, contributes significantly to environmental pollution, while noise pollution impacts public health and productivity. Incorporating Styrofoam into concrete mixtures offers a dual benefit of reducing waste and enhancing acoustic insulation, especially for non-structural applications. The research evaluates the mechanical and acoustic performance of Styrofoam-based lightweight concrete, with a focus on mixtures with varying Styrofoam content. Results show that the incorporation of Styrofoam reduces the concrete density to a range of 1000–1300 kg/m³, with the lightest mix yielding a density of 1097.88 kg/m³. While the addition of Styrofoam significantly improves sound absorption—especially in mid-frequency ranges—there is a notable decline in mechanical properties, particularly flexural strength, which limits its application for structural purposes. The highest flexural strength observed was 44.12 kg/cm², significantly lower than that of conventional concrete. The findings indicate that Styrofoam-based lightweight concrete, particularly with a thickness of 15 cm and high Styrofoam content, is well-suited for non-structural applications such as partition walls due to its favorable acoustic performance and reduced weight. However, to enhance its mechanical properties, future research is recommended to explore reinforcement techniques. This study fills a critical gap by simultaneously addressing the environmental concerns of Styrofoam waste and the need for effective sound insulation in urban development.

Downloads

Download data is not yet available.

References

Abdillah, Y. F., Setiawan, I., & Utomo, A. B. S. (2019). Pengaruh Diameter Leher Resonator Helmholtz Pada Alat Pemanen Energi Akustik (Acoustic Energy Harvester) Terhadap Daya Listrik Yang Dihasilkan. Prosiding SNFA (Seminar Nasional Fisika Dan Aplikasinya), 4. https://doi.org/10.20961/prosidingsnfa.v4i0.35922

Abiansyah, L., & Rifdah, A. (2020). Compressive Strength of Structural Lightweight Concrete Using Styrofoam as an Aggregate Substitution. Journal of World Conference (JWC), 2(3). https://doi.org/10.29138/prd.v2i3.222

Aditama, V., Ester Priskasari, & Mohammad Erfan. (2024). Pengaruh Serat Bambu terhadap Kapasitas Lentur Pelat Beton Campuran Styrofoam dengan Perkuatan Tulangan Wiremesh. INFOMANPRO, 13(1), 38–49. https://doi.org/10.36040/infomanpro.v13i1.10369

Ahmad, S., Ayob, Z., Hussain, N. H. M., & Nayan, N. M. (2022). Assessment of Landscape Maintenance Towards Cost Planning: Expert Validation on the Criteria of Sustainable Landscape Maintenance for Public Parks. Planning Malaysia, 20(3). https://doi.org/10.21837/PM.V20I22.1129

Andryanto, J., & Kushartomo, W. (2023). Sifat Mekanis Beton Ringan dengan Styrofoam sebagai Media Pembentuk Udara. JMTS: Jurnal Mitra Teknik Sipil. https://doi.org/10.24912/jmts.v6i2.21668

Boué, A. (2025). Regulating underwater noise: from international legal framework to local initiatives. https://doi.org/10.5194/oos2025-1070

Cahyono, D. B., Adi, H. P., Wahyudi, S. I., & Pratikso. (2022). Lightweight concrete as covers on floating house platforms made from expanded polystyrene system (EPS) material. IOP Conference Series: Earth and Environmental Science, 955(1). https://doi.org/10.1088/1755-1315/955/1/012012

Cai, X., Yang, J., Hu, G., & Lu, T. (2018). Sound absorption by acoustic microlattice with optimized pore configuration. The Journal of the Acoustical Society of America, 144(2). https://doi.org/10.1121/1.5051526

Chen, L., Li, Q., Zhang, Y., & Xu, L. (2023). Civil Aircraft Airworthiness Noise Measurement. Journal of Physics: Conference Series, 2489(1). https://doi.org/10.1088/1742-6596/2489/1/012020

Daigle, G. (2001). The International-INCE Technical Initiatives: An overview. The Journal of the Acoustical Society of America, 109(5_Supplement). https://doi.org/10.1121/1.4744732

Fediuk, R., Amran, M., Vatin, N., Vasilev, Y., Lesovik, V., & Ozbakkaloglu, T. (2021). Acoustic properties of innovative concretes: A review. In Materials (Vol. 14, Issue 2). https://doi.org/10.3390/ma14020398

Finegold, L. S., & Schomer, P. D. (2001). Assessing the effectiveness of national and international noise policies and regulations. The Journal of the Acoustical Society of America, 109(5_Supplement). https://doi.org/10.1121/1.4744733

Herki, B. (2017). Absorption Characteristics of Lightweight Concrete Containing Densified Polystyrene. Civil Engineering Journal, 3(8). https://doi.org/10.28991/cej-2017-00000115

Himawanto, D. A. (2012). Multisteps Global Kinetic Analysis of MSW Slow Pyrolysis. IPTEK The Journal for Technology and Science, 24(3). https://doi.org/10.12962/j20882033.v24i3.189

Jena, D. P., Dandsena, J., & Jayakumari, V. G. (2019). Demonstration of effective acoustic properties of different configurations of Helmholtz resonators. Applied Acoustics, 155. https://doi.org/10.1016/j.apacoust.2019.06.004

Kumar, D., Rani, S., Mathew, B. T., Chikara, R. K., Nandan, B., & Srivastava, R. K. (2024). Hydrothermal Pyrolysis of Styrofoam Waste for Efficient Copper Ion Sensing Using Graphene Quantum Dots. ACS Sustainable Resource Management, 1(8), 1824–1833. https://doi.org/10.1021/acssusresmgt.4c00202

Kumar, P., Pasla, D., & Jothi Saravanan, T. (2023). Self-compacting lightweight aggregate concrete and its properties: A review. In Construction and Building Materials (Vol. 375). https://doi.org/10.1016/j.conbuildmat.2023.130861

Mahmoud, H. A., Tawfik, T. A., Abd El-razik, M. M., & Faried, A. S. (2023). Mechanical and acoustic absorption properties of lightweight fly ash/slag-based geopolymer concrete with various aggregates. Ceramics International, 49(13). https://doi.org/10.1016/j.ceramint.2023.03.244

Marzukhi, M. A., Abdullah, J., Leh, O. L. H., Zanudin, K., & Danial, M. H. (2022). The Challenges of Public Participation in the Malaysian Planning System. Planning Malaysia, 20(4). https://doi.org/10.21837/pm.v20i23.1161

Mohd Nasir, Y. H., Wan Ismail, W. Z., Misni, A., & Aksah, H. (2024). Assessing Environmental Noise Pollution Around Public Hospitals in Selangor, Malaysia: Implications for Urban Planning. PLANNING MALAYSIA, 22. https://doi.org/10.21837/pm.v22i34.1618

Ngudi, H. C., Sudharto, P. H., & Ernie, S. (2024). Utilization of styrofoam in lightweight concrete as a soundproof wall. IOP Conference Series: Earth and Environmental Science, 1414(1), 012047. https://doi.org/10.1088/1755-1315/1414/1/012047

Ngudi Hari Crista. (2024). The Effectiveness of Styrofoam Mixtures in Lightweight Concrete Walls. Journal of Electrical Systems, 20(4s), 2479–2489. https://doi.org/10.52783/jes.2805

Nisumanti, S., Putri, Y. E., -, T., Fitri, N., Nazila, I., & Hidayat, F. (2024). Optimization of Styrofoam as Concrete Replacement Material Subjected to Compressive Strength. Jurnal Kejuruteraan, 36(4), 1477–1482. https://doi.org/10.17576/jkukm-2024-36(4)-13

Novizal, N., Joniwarta, J., Fauzi, F., & Marsya, M. (2019). Morphology and Composite Characteristics of Lightweight Concrete with Styrofoam Filling Materials. https://doi.org/10.4108/eai.19-10-2018.2282216

Nurherdiana, S. D., Wahyudi, B., Stefanny, M. J., Karlina, A., Yogaswara, R. R., Jalil, M. J., & Fansuri, H. (2023). Characteristics of Styrofoam Waste-Based Membrane Through Vapor- and Liquid-Induced Phase Inversion Process. Jurnal Kimia Riset, 8(1). https://doi.org/10.20473/jkr.v8i1.42957

Rathika, S., Brindha Devi, V., Premkumar, R., Ranjith, P., & Dhilip kumar, R. (2023). Experimental investigation on lightweight concrete by adding polystyrene beads. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.05.444

Siyal, A. N., Memon, S. Q., & Khuhawar, M. Y. (2012). Recycling of styrofoam waste: Synthesis, characterization and application of novel phenyl thiosemicarbazone surface. Polish Journal of Chemical Technology, 14(4). https://doi.org/10.2478/v10026-012-0095-0

Solikin, M., Widiyanto, R., Asroni, A., Setiawan, B., & Asnan, M. N. (2019). High content Styrofoam as partial substitution for fine aggregate in SCC lightweight concrete brick. AIP Conference Proceedings, 2114. https://doi.org/10.1063/1.5112426

Srividya, T., Kannan Rajkumar, P. R., Sivasakthi, M., Sujitha, A., & Jeyalakshmi, R. (2022). A state-of-the-art on development of geopolymer concrete and its field applications. Case Studies in Construction Materials, 16. https://doi.org/10.1016/j.cscm.2021.e00812

Yanto, D. H. Y., Krishanti, N. P. R. A., Ardiati, F. C., Anita, S. H., Nugraha, I. K., Sari, F. P., Laksana, R. P. B., Sapardi, S., & Watanabe, T. (2019). Biodegradation of styrofoam waste by ligninolytic fungi and bacteria. IOP Conference Series: Earth and Environmental Science, 308(1). https://doi.org/10.1088/1755-1315/308/1/012001

Downloads

Published

2025-10-16

How to Cite

Crista, N. H., Hadi, S. P., Setyowati, E., Cahyono, D. B., & Hanif, M. (2025). ACOUSTIC AND MECHANICAL PERFORMANCE OF STYROFOAM-BASED LIGHTWEIGHT CONCRETE. PLANNING MALAYSIA, 23(38). https://doi.org/10.21837/pm.v23i38.1798